Ashirvad Flowguard Plus Cross Tee

Product Highlights

• Material: CPVC (Chlorinated Polyvinyl Chloride)
• Configuration: Four-way cross junction
• Temperature Rating: Up to 93°C (200°F)
• Pressure Rating: SDR-11 (PN 15 / 15 kg/cm²)
• Connection: Socket type (Solvent Weld) - Four ports

Product Description

Ashirvad Flowguard Plus Cross Tee provides maximum branching capability in a single fitting, featuring four socket connections arranged in a cross pattern. This specialized fitting allows for creating two perpendicular branches from a main run, or distributing water in four directions from a central point. The precision-molded design ensures balanced flow distribution and maintains full pressure rating across all four ports.

Essential for manifold systems, multi-zone distribution, and complex plumbing layouts requiring multiple branches from a single location. The cross tee eliminates the need for multiple tee fittings and reduces installation time while minimizing potential leak points. Compatible with all Ashirvad Flowguard Plus CPVC pipes when installed with recommended solvent cement.

Recommended Applications

• Manifold Systems: Creating central distribution points for multiple zones
• Multi-Bathroom Distribution: Distributing water to multiple bathrooms from single point
• Complex Layouts: Simplifying installations requiring multiple branches
• Commercial Buildings: Multi-unit distribution in apartments and offices
• Irrigation Systems: Creating multiple outlet points for garden watering
• Space-Efficient Routing: Maximizing branches while minimizing fitting count

Installation Guidelines

FAQs

1) When should I use a cross tee instead of multiple regular tees?

Use a cross tee when you need four-way distribution from a single point. It's more compact than using two separate tees, reduces the number of joints (fewer potential leaks), and simplifies installation. However, cross tees create more flow restriction than separate tees, so they're best for low-flow applications or where space is limited.

2) Can I cap one port of a cross tee if I only need three branches?

Yes, you can install an end cap on any unused port of a cross tee. However, if you only need three branches, a regular tee is more cost-effective and creates less flow restriction. Use cross tees when you need all four ports or may need the fourth port in the future.

3) Do cross tees affect water pressure more than regular tees?

Yes, cross tees create more turbulence and pressure drop than regular tees due to the four-way junction. For high-flow applications, consider using separate tees instead. Cross tees work well for low-flow distribution or where multiple small branches are needed.

4) Can cross tees be used in any orientation?

Yes, cross tees can be installed horizontally, vertically, or at any angle as long as all four branch directions meet your layout requirements. Ensure proper pipe support on all four branches to prevent stress on the joints.

5) What sizes are available in CPVC cross tees?

Cross tees are typically available in common sizes including 15mm (1/2"), 20mm (3/4"), and 25mm (1"). Availability may vary by size, with 15mm and 20mm being most common for residential applications. Check with your supplier for specific size availability.

Why Buy from MaterialRunner?